Navigating The Epson Printer Driver With Photoshop

Color - Management, Printing  Comment
0 Likes



Successfully managing color for digital printing requires that the color in an image file be converted from its device-neutral color space to a device-specific color space. (Typically this occurs by converting from Adobe RGB 1998 or Pro Photo RGB  to a device-specific color space defined by an ICC profile characterizing a specific combination of printer, ink, paper, and driver.)

Using Photoshop, you can either convert color in an image before you send it to a printer driver or after you send it to a printer driver.

Choose one method of color management – not two. Easily made, a classic mistake is using both. Double color management typically results in a print that is too light and magenta.

The Epson printer driver provides many ways to manage color conversions and get reasonably good color. Two methods offer the best results; the Photoshop route and the Epson route.
How do you choose either of these methods?

Let Photoshop’s Print window (under Color Handling) guide you – Let Photoshop Determine Colors and Let Printer Determine Colors. (While the principle is the same for most printers, interfaces will vary. Here’s information for the most current Epson interface.)

If you choose Let Photoshop Determine Colors under Color Handling, select a profile for Photoshop to make the conversion with (a paper/ink/driver specific profile not the interface default of Working RGB) under Printer Profile, choose a Rendering Intent of either Relative Colorimetric or Perceptual, and then click Print Settings. In the Print window choose the correct Printer and then change Copies and Pages to Print Settings. Select the correct Media Type, uncheck High Speed, and choose the highest printer resolution available. Finally, change Print Settings to Color Management and select Off (No Color Adjustment). The Photoshop route turns Photoshop’s color conversion on and turns the printer’s color conversion off.

The Photoshop route tends to hold slightly more saturation but it’s rendition of neutral colors and gray balance is usually not as good as the Epson route. The Photoshop route is the route to take when you want to use a custom profile. Use it if you are printing with either third-party inks or papers which require the use a custom profile to accurately describe the behavior of the alternate media.

If you choose Let Printer Determine Colors under Color Handling, choose a Rendering Intent of either Relative Colorimetric or Perceptual, and then click Print Settings. In the Print window choose the correct Printer. Change Copies and Pages to Print Settings to select the correct Media Type, uncheck High Speed, and choose the highest printer resolution available. Finally, change Print Settings to Color Management, choose EPSON Standard (sRGB) under Mode, and select Color Controls. The Epson route turns Photoshop’s color conversion off and turns the printer’s color conversion on.

The Epson route tends to deliver a significantly improved rendition of neutral colors and gray balance with slightly less saturation. Try it when printing neutral colors. Use the Epson driver’s Advanced B&W Photo feature for black and white images.

Each route works well. Each route yields slightly different results. Test them to see the differences. (Note that you cannot see the differences between printing routes when softproofing; you have to make physical proofs to see these differences. They can significant.)
Read More

How To Avoid Double Color Management – Epson Printers

Color - Management, Printing  Comment
0 Likes


Get This – Correct Color Management
Avoid This Double Color Managed
Is your print too light and magenta? Double color management. It’s a classic mistake. I sometimes make it myself when I’m working too fast. So that you know what to look for, I recommend that you make the mistake deliberately, once, and only once, if possible.
Don’t do this …

And this …

What’s the right solution?
Check your software (Photoshop or Lightroom) and printer software (Epson driver) settings, reset them, and print again. Choose one method of color management – not two.
Read more in my online resources.
Learn more in my digital printing workshops.

Blend It Out

Magazine - Digital Photo Pro, Photography, Software - Photoshop  Comment
0 Likes




It’s a perfect shot! If only those unwanted moving objects (UMOs, i.e., a person or a crowd) in the scene would disappear. As long as the unwanted elements in your frame move, even just a little, you can make them disappear from your image by taking two or more shots and using Photoshop’s layering and blending capabilities.
You don’t have to retouch your image. Blending is different than retouching. The unwanted elements aren’t covered over with new information by hiding them with replacement information similar to the surround, either from the same source or another. With blends, the information behind the moving subject is revealed. How? It’s contained in the other shot(s).
You even can do this with exposures that are made with slightly different angles of rotation or framing, so you can use this technique with handheld exposures, not just those made with a tripod. Camera motion may make manual registration difficult, but Photoshop automatically will align and, in some cases, distort the separate exposures so that they register precisely …
Read more at Digital Photo Pro.
Learn more in my digital photography ebooks.
Learn more in my digital photography workshops.

Crop or Retouch ?

Magazine - Digital Photo Pro  Comment
0 Likes



As visual communicators, we’re responsible for everything that’s in the frame; we’re also responsible for everything that’s not in the frame. Deciding what’s in the frame and what’s out is a critical decision that can make or break an image. Here are two essential framing strategies.
1.?Use the frame to eliminate distracting information around a subject.
Take extra care with image information that touches the frame, as it will draw extra attention. Do this with significant compositional elements.
2.?Eliminate space around a subject to focus a viewer’s attention.
A lot of space between the subject and the frame can be used to call on psychological associations with space, such as freedom or isolation. Some space between the subject and the frame can give the appearance of the subject resting gracefully within the frame. Touching the subject with the frame strongly focuses the attention of the viewer and may seem claustrophobic. Cropping the subject with the frame can focus the attention of the viewer on specific aspects of the subject and/or give an image a tense quality, evoking evasion and incompleteness—this often seems accidental if less than half the subject is revealed.
There’s more than one way to apply these strategies. While cropping techniques are simple to practice, the reasons for their application and the choices made about how to apply them, as well as the final effects, may be exceptionally complex. You have two choices ..
1. Reposition the frame before exposure.
2. Contract the position of the borders of an image after exposure
If you plan to retouch, you’ll frame and crop differently …
Read more at Digital Photo Pro.
Find more digital photography techniques here.
Learn more in my digital photography worskhops.

Reduce Color Noise With Photoshop

Magazine - Digital Photo Pro, Software - Photoshop  Comment
0 Likes



It’s challenging to reduce the luminance (light and dark) component of noise without compromising image sharpness; often it requires a careful application of specialized software.

However, you can easily reduce the color component of noise using Photoshop.

Here’s how.

1    Duplicate the Background layer and turn the duplicate layer’s blend mode to Color.

2    Blur the layer (Filter: Blur: Gaussian Blur).

Be careful not to use the blur filter too aggressively. If contours exhibit reduced saturation, use a lower filtration
Using this technique, only the color of an image will be blurred, not its luminance; image sharpness will not be compromised. Luminance noise will persist; other methods are required to remove it.

This industrial strength technique is most useful when dealing with serious color noise when a Raw converter’s features can’t go far enough, such as the larger areas of color noise found in some images from Bayer pattern demosaicing.

Read more on Noise Reduction here.
Learn more in my digital printing and digital photography workshops.

OnOne Free Plug Ins

Software  Comment
0 Likes


Get 20% off OnOne products with this code – PRINT20 !
OnOne offers free Plug-Ins.
You can add professional photographic effects, frames and backgrounds in Photoshop with just a few clicks with PhotoTools 2.5 Free Edition and PhotoFrame 4.5 Free Edition from onOne. You can also download free Lightroom Presets and Camera Raw Presets to speed up your workflow and instantly add effects. These products are yours to keep (they don’t expire) and will save you hours of time enhancing images in Photoshop and Lightroom.
Learn more about OnOne here.
Learn more in my digital photography workshops.